Informasjon på engelsk:
Application:
- 20-60 sized Aircraft
- 60 sized Helicopters
- Steering and throttle
- Nitro & Gasoline Truck & Boats
Fra produsenten:
Product Description
Pro level hobbyists demand the power and precision found in our triple threat HSB-94XX servos. Each one is designed with our durable steel gears and impressive brushless motors with the HSB-9475SH delivering multipurpose performance.
NOTICE: Please read this service bulletin regarding Hitec brushless servos with certain RC devices.
Brushless Servo Service Bulletin
While compatible with most radio control devices, the regenerative braking feature of the HSB-9XXX series servos may cause a problem if the device cannot accept a backflow of current. The types of devices that cannot accept this backflow are: Voltage Regulators, Power Safe Receivers and certain BEC circuits whether stand alone or integrated within an Electronic Speed Control. Check with the manufacturer or the Hitec website for a list of compatible models. If your device cannot accept a current backflow, then you must install a PAD (Power Absorbing Device – Hitec PN# 55756) as described in this manual. A PAD is included with every Hitec brushless servo.
Features
- Programmable 12-Bit PWM Digital Amplifier
- Custom Long Life Brushless Motor
- 1M Cycle Long Life Potentiometer
- Constant Output Torque
- Wide Operating Voltage (5 ~ 9 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- Dust Resistant and Splash Proof Case
- 25-Tooth Output Spline
- Nylon Reinforced Plastic Case
- Ultra Low Power Consumption
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Data Save / Load
- Program Reset (From File)
Accessories
- Steel Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic Case Set | Link |
- Applicable Horns | Link 1 • 2 • 3 |
HS-9475SH Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
| Speed (Second @ 60°) | 0.13 ~ 0.10 |
| Maximum Torque Range oz. / in. | 269 |
| Maximum Torque Range kg. / cm. | 19.4 |
| Current Draw at Idle | 30 mA |
| No Load Operating Current Draw | 430 mA |
| Stall Current Draw | 900 mA |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.78 x 1.45 |
| Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
| Weight (Ounces) | 2.19 |
| Weight (Gram) | 62.0 |
| Circuit Type | EBL Digital |
| Motor Type | Brushless |
| Gear Material | Steel |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | H25T |
| Case Material | Plastic |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
| Radio Control Applications | |
| Parkflyer | N / A |
| Sport Plane | 30 – 40% |
| Sailplane | 2 meters and up |
| 3D Performance | 30 – 40% |
| Scale | 30 – 40% |
| Electric Helicopter | N / A |
| Gas Helicopter | N / A |
| On Road | 1/8th |
| Monster Truck | 1/8th |
| Buggies | 1/8th |
| Truggies | 1/8th |
| Short Course / Truck | 1/8th |
| Crawlers | 1/8th |
| Sail Boat | = >1M & Scale |
| Power Boat | 1/8th |
| Størrelse | |
|---|---|
| Type | Digital |
| Spenning | 6.0V, 7.4v |
| Merke | Hitec |
| Torque | 19.4kg |
| Drev | Metall |
| Hastighet | 0.10 |
| Spline | 25 |
| Til | Båt, Bil, Fly, Helikopter |
| Vekt | 62g |
Relaterte produkter
