Informasjon på engelsk:
Application:
- 20-60 sized Aircraft
- 60 sized Helicopters
- Steering and throttle
- Nitro & Gasoline Truck & Boats
Fra produsenten:
Product Description
Pro level hobbyists demand the power and precision found in our triple threat HSB-94XX servos. Each one is designed with our durable steel gears and impressive brushless motors with the HSB-9485SH bringing immense torque.
NOTICE: Please read this service bulletin regarding Hitec brushless servos with certain RC devices:
Brushless Servo Service Bulletin
While compatible with most radio control devices, the regenerative braking feature of the HSB-9XXX series servos may cause a problem if the device cannot accept a backflow of current. The types of devices that cannot accept this backflow are: Voltage Regulators, Power Safe Receivers and certain BEC circuits whether stand alone or integrated within an Electronic Speed Control. Check with the manufacturer or the Hitec website for a list of compatible models. If your device cannot accept a current backflow, then you must install a PAD (Power Absorbing Device – Hitec PN# 55756) as described in this manual. A PAD is included with every Hitec brushless servo.
Features
- Programmable 12-Bit PWM Digital Amplifier
- Custom Long Life Brushless Motor
- 1M Cycle Long Life Potentiometer
- Constant Output Torque
- Wide Operating Voltage (5 ~ 9 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- Dust Resistant and Splash Proof Case
- 25-Tooth Output Spline
- Nylon Reinforced Plastic Case
- Ultra Low Power Consumption
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Data Save / Load
- Program Reset (From File)
Accessories
- Steel Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic Case Set | Link |
- Applicable Horns | Link 1 • 2 • 3 |
HS-9485SH Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
| Speed (Second @ 60°) | 0.18 ~ 0.15 |
| Maximum Torque Range oz. / in. | 361 |
| Maximum Torque Range kg. / cm. | 26.0 |
| Current Draw at Idle | 30 mA |
| No Load Operating Current Draw | 430 mA |
| Stall Current Draw | 1,100 mA |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.78 x 1.45 |
| Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
| Weight (Ounces) | 2.19 |
| Weight (Gram) | 62.0 |
| Circuit Type | EBL Digital |
| Motor Type | Brushless |
| Gear Material | Steel |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | H25T |
| Case Material | Plastic |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
| Radio Control Applications | |
| Parkflyer | N / A |
| Sport Plane | 30 – 40% |
| Sailplane | 2 meters and up |
| 3D Performance | 30 – 40% |
| Scale | 30 – 40% |
| Electric Helicopter | 700mm and up |
| Gas Helicopter | 90+ Class |
| On Road | 1/8th |
| Monster Truck | 1/8th |
| Buggies | 1/8th |
| Truggies | 1/8th |
| Short Course / Truck | 1/8th |
| Crawlers | N / A |
| Sail Boat | = >1M & Scale |
| Power Boat | 1/5th |
| Størrelse | |
|---|---|
| Type | Digital |
| Spenning | 6.0V, 7.4v |
| Merke | Hitec |
| Torque | 26kg |
| Drev | Metall |
| Hastighet | 0.15 |
| Spline | 25 |
| Til | Båt, Bil, Fly, Helikopter |
| Vekt | 62g |
Relaterte produkter
