Informasjon på engelsk:
Application:
- Airplane
- Giant Scale Car
- Boat
- UAV
- Robotics
- Industry
- Special Effects
Fra produsenten:
The D845WP servo is a IP-67 rated servo capable of being truly waterproof, dust resistant, and ready for 1/5th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D845WP produces the mighty torque and reliability required to take bashers to the next level.
Features
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- IPD 67 Rated Water Resistant and Waterproof Proof Case
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
Accessories
- 3 Steel Alloy Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic / Aluminum Case Set | Link |
- Applicable Horns & Screws
D845WP Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 4.8V ~ 7.4V |
| Speed (Second @ 60°) | 0.26 ~ 0.17 |
| Maximum Torque Range oz. / in. | 452 ~ 695 |
| Maximum Torque Range kg. / cm. | 32.5 ~ 50.0 |
| Current Draw at Idle | 30 mA |
| No Load Operating Current Draw | 1,600 mA |
| Stall Current Draw | 10,000 mA |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 2.6 x 1.26 x 2.44 |
| Dimensions (Metric) | 66.0 x 32.0 x 62.0 |
| Weight (Ounces) | 8.01 |
| Weight (Gram) | 227.0 |
| Circuit Type | 32bit Programable Digital |
| Motor Type | Coreless Metal Brush |
| Gear Material | MK 1st Gear & 3 Steel Alloy Gears |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | 15T / 8 |
| Case Material | Plastic / Aluminum |
| Dust / Water Resistance | IP67 Rating |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
| Radio Control Applications | |
| Parkflyer | N / A |
| Sport Plane | N / A |
| Sailplane | N / A |
| 3D Performance | N / A |
| Scale | N / A |
| Electric Helicopter | N / A |
| Gas Helicopter | N / A |
| On Road | 1/5th |
| Monster Truck | 1/5th |
| Buggies | 1/5th |
| Truggies | 1/5th |
| Short Course / Truck | 1/5th |
| Crawlers | 1/5th |
| Sail Boat | N / A |
| Power Boat | Gas |
| Størrelse | |
|---|---|
| Type | Digital |
| Spenning | 4.8V, 6.0V, 7.4v |
| Merke | Hitec |
| Torque | 50kg |
| Drev | Metall |
| Hastighet | 0.17 |
| Spline | 15 |
| Vanntett | |
| Til | |
| Vekt | 227g |
Relaterte produkter
