1/48 Republic P-47D Thunderbolt® “Bubbletop” plastbyggesett.
Anbefalte farger:
AS-6 OliveDrab (USAAF) (XF-62)
AS-7 Neutral Gray (USAAF)
AS-12 Bare-Metal Silver
TS-29 Semi Gloss Black
X-5 Green
X-6 Orange
X-7 Red
X-11 Chrome Silver
X-23 Clear Blue
X-27 Clear Red
X-31 Titanium Gold
XF-1 Flat Black
XF-3 Flat Yellow
XF-4 Yellow Green
XF-5 Flat Green
XF-7 Flat Red
XF-10 Flat Brown
XF-15 Flat Flesh
XF-16 Flat Aluminum
XF-49 Khaki
XF-56 Metallic Grey
XF-57 Buff
XF-64 Red Brown
Fra produsenten:
Fuselage length: 230mm. Image shows painted and assembled kit.
| About the Thunderbolt “Bubbletop” In May 1941, as the war raged in Europe, a single-engine fighter of more than 4 tons made its first flight. This fighter was the XP-47B, prototype of the Republic P-47 Thunderbolt of which a total of 15,683 units would be built. Thanks to war experience, this aircraft was equipped with a 2,000hp radial R-2800 engine, a supercharger and eight 12.7mm machine guns. The XP-47B was to reach 633km/h and in January 1942, just after the United States went to war, the production of P-47B began. It was followed by the P-47C that incorporated various improvements and, from April 1943, by the P-47D, the most built version. The P-47D was equipped with an R-2800-59 engine, which can develop up to 2,300hp with combat emergency water injection system engaged. The ducts that were passing on the sides and below the cockpit to connect the supercharger placed behind the pilot’s seat gave to this plane its massive aspect. Many sub-types of the P-47D, designated D-1 to D-40, were produced but the first versions were called “Razorback” because of their sharp edge dorsal fin. The D-25 sub-type, which was introduced around June 1944, was fitted with an electrically actuated bubble canopy in order to improve pilot visibility and increased capacity fuel tanks. This decision resulted in a completely remodeled plane shape. All subsequent sub-types were also fitted with the bubble canopy and became a characteristic feature of late production Thunderbolts. The P-47 “Bubbletop” proved to be an excellent, well-balanced fighter-bomber. |
| About the Model ★This is a 1/48 scale plastic model assembly kit. Fuselage length: 230mm, wingspan: 259mm. ★This is the representation of P-47D late production that was nicknamed “Bubbletop”. ★The massive form of the plane, especially its belly and its cowling, has been accurately reproduced. ★Flaps come as separate parts and can be attached in the up or down position. ★Parts for replication of 3 types of mirrors, gun sights and 4 types of propellers are provided. ★Engine cowling flaps and the intercooler air outlets on each side of the fuselage can be represented in the opened or closed position. ★Parts for replication of 500-pound bombs, rocket launchers and three types of drop tank are part of the kit. ★A pilot figure and decals for two different markings are included. |
 Packaging |
 ★The “Bubbletop” form is expertly recreated in detailed 1/48 scale. |
 ★Choose whether to depict as a bomber or attack fighter, with ordnance for both types included. |
 ★This image shows the model with 4.5-inch rocket launcher attached. |
 ★Choose whether to assemble with canopy open or closed. The cockpit offers a satisfyingly detailed finish. |
 ★Flaps can be assembled up or down. |
 ★A choice of propellers and parts for open and closed engine cowlings is included. |
 |
 |
★Left: Fuselage-side intercooler shutters can be assembled open or closed.
★Right: Two different marking options are included in the kit. |
Information is current as of January 27, 2023. Specifications are subject to change without notice.
| Merke | Tamiya |
|---|---|
| Produkt | Plastbyggesett |
| Skala | 1:48 |
| Tema | |
| Type | FLY |
Relaterte produkter
kr329.00 inkl. Mva
kr469.00 inkl. Mva
Utsolgt
