MFC-02 settet tilfører Tamiya High-Lift modeller “ultra-realisme”, med lyd, lys og vibrasjon.
Multifunksjonsmodulen styrer opp til 33 lys. Den har en rekke forskjellige lysfunksjoner.
Headlight 1 | Headlight 2 | High Beam |
Fog Lamp 1 | Fog Lamp 2 | Fog Lamp 3 |
Fog Lamp 4 | Fog Lamp 5 | Auxiliary Lights (Front) |
Auxiliary Lights (Rear) | Turn Signal (Front Right) | Turn Signal (Front Left) |
Turn Signal (Rear Right) | Turn Signal (Rear Left) | Reverse Lamp |
Brake Lamp | Flash Lamp |
Den har 24 forskjellige lydeffekter.
Engine Starting 1 | Idling 1 | Running 1 |
Engine Stop 1 | Up-shifting 1 | Down-shifting 1 |
Horn 1 | Engine Starting 2 | Idling 2 |
Running 2 | Engine Stop 2 | Up-shifting 2 |
Down-shifting 2 | Horn 2 | Gear Changing |
Turn Signal | Timer 1 | Timer 2 |
Timer 3 | Alarm |
16 forskjellige spesialfunksjoner er tilgjengelig fra multifunksjonsmodulen via en 4-kanals sender (ikke inkludert).
Steering Control | Throttle Control | Horn Operation |
High Beam Operation | Gear Shifting Operation | Turn Signal Operation |
Hazard Lamp Operation | Headlight Operation | Brake Operation |
Engine Start/Stop Operation |
Mer:
- Vibrasjonsmotoren gjenskaper bevegelse i bilen i takt med bilens motorlyd (simulert)
- Kan kjøres i realistisk lav fart
- Høytaler kan kobles opp mot eksterne lydkilder, som for eksempel; MP3 spiller (for musikkavspilling)
- Kan brukes i tre moduser: R/C modus med MFC effekter, R/C modus uten MFC effekter og Demo Mode for en demonstrasjon av lys og lyd -effekter.
- Detaljert og brukervennlig manual
Viktig:
- Kun kompatibel med 540 motoren inkludert i High-Lift byggesettet
- Kan ikke brukes med 2-kanals eller 3-kanals sender (minimum 4-kanals)
- Ikke kompatibel med PCM sendere, multi-kanals mottakere og eldre Sanwa mottakere
Fra produsenten:
Ultra-authentic pick-up truck experience Fit this MFC-02 unit to your 1/10 R/C pick-up truck model for supremely authentic lights, sounds, and even vibrations, all of which are coordinated with model actions. A multitude of engine sounds are recreated, from ignition and idling noises, to shift changes and even alterations to pitch as throttle increases. Two flavors are provided to choose between – a big V8 and a smaller turbocharged engine. Vibration levels also change in unison with the increases in imagined RPM. An electronic clutch is installed, which can be manipulated using transmitter control sticks. |
Authentic sounds Engine noises for both a big V8 and a smaller turbocharged engine were sampled from real engines for this product. A plethora of different noises are recreated as shown below. ★Ignition ★Idling ★Drive ★Turning off ★Shift changes (up & down) ★Horn ★Turn signals ★Hazard lamps ★Timer count ★Warning ★..and other sounds depending upon whether separately-sold option parts are installed. |
Impressive lights Various lights (see below) can be controlled via transmitter or the MFC-02, and are shown in conjunction with model actions. Headlights are modeled on HID lamps. ★Headlights ★Full beam ★Road lights ★Auxiliary lights ★Turn signals ★Hazard lamps ★Reverse lights ★Brake lamps ★…and other sounds depending upon whether separately-sold option parts are installed. |
Specifications are subject to change without notice.